The CONT-1022 Smart Sensor is a contact monitoring device which accepts two contact inputs and is a member of the SensiNetwireless sensor network. It continuously monitors the state of its inputs and reports their status on a selectable reporting interval and will also report any change in status immediately for real-time alarming. The CONT-1022 can be used with a variety of switches including mechanical, IR, and magnetic

Device Specifications

Radio

IEEE 802.15.4 compliant, 2.4 GHz DFSS

Regulatory

FCC Part 15 and CE Approval

Antenna

Internal antenna

Range

Up to 700 ft/212m range (outdoor, line of sight)
Up to 230 ft/70m range (typical indoor conditions)

Operating temperature

-10°C to 50°C

Operating humidity

Up to 100% non-condensing

Battery

AA 3.6 lithium thionylchloride battery

Battery life

1.5 years at 2 minute reporting intervals

Duty cycle

Remotely user adjustable; default to 1 minute

LED

Diagnostic LED indicating power/connectivity

Dimensions

3.5” x 5.5” x 1.375”

89mm x 140mm x 35mm

Packaging

ABS Box –IP30 rated

Mounting

Surface flange mount

Input Specifications

Number of circuits

2 channels

Supported switches

Use with any STSP electrical contact switch, magnetic, mechanical relay, photocell, IR etc.

Frequency of detected change state

1/10 second

Switch cable distance

10 meters (switch sensor)

Sensor terminal connection

•#28 to 14 AWG gauge

•Clamping yoke connection

CONT-1022 Data Sheet

Category	Model	Item
Smart Sensors	CONT-1022-E	Contact Closure node – 2-port

Gateway 1020