The TEMP-1022/1122 & TEMP-1024/1124 Smart Sensors are wireless temperature measuring devices that accept either 2 or 4 standard RTD’s and are components of the SensiNet™ wireless sensor network.
The TEMP-1022/1122 & TEMP-1024/1124 Smart Sensors are wireless temperature measuring devices that accept either 2 or 4 standard RTD’s and are components of the SensiNet™ wireless sensor network. They report highly accurate , real-time temperature measurements without wires and are FCC and CE-approved for license free operation.
The TEMP series is user configurable for RTD type and configuration (2,3,4 wire) and even monitors the inputs for integrity and provides alarm indication in the event of sensor or lead wire failure. They operate from on board batteries or may be DC line powered for continuous operation.
| Radio Specifications, | |
|---|---|
| Radio | IEEE 802.15.4 compliant, 2.4 GHz DFSS |
| Regulatory | FCC Part 15 and CE Approval |
| Antenna | Internal antenna |
| Range | Up to 7ft/212m range (outdoor, line of sight) |
| Up to 23ft/7m range (typical indoor conditions) | |
| Operating temperature | -1°C to 5°C |
| Operating humidity | Up to 1% non-condensing |
| Power options | AA 3.6 lithium thionyl chloride battery (included) |
| +1 to +3VDC | |
| Battery life | TEMP-1022 & 1122, 1.5 years at 2 minute intervals |
| TEMP-1024 & 1124, 1.0 years at 2 minute intervals | |
| Update interval | User selectable 1 sec to 6minutes |
| Dimensions | 89mm x 14mm x 35mm |
| Packaging | ABS Box IP3rated |
| Mounting Options | Surface mount flange |
| Double-sided adhesive tape | |
| RTD-Specifications | RTD terminal connection |
| #28 to 14 AWG wire gauge | |
| Clamping yoke connection | |
| Pluggable terminal block connector | |
| Supported RTD types | |
| 2,3,& 4 wire versions of | |
| 10 ohm@ 25C, Copper; 0.00427 ohm/ohm/C | |
| 100 ohm @0C, Platinum; 0.00392 ohm/ohm/C | |
| 100 ohm @0C, Platinum;0.00385 ohm/ohm/C | |
| Temperature range | TEMP-1022 & TEMP 1024: (-)100C to 200C |
| TEMP-1122 & TEMP 1124: ( -) 20C to 540C |
| Category | Model | Item |
| Smart Sensors | TEMP-1022-E | 2-port RTD node (Pt, Cu -100 to +200C) |
| TEMP-1024-E | 4-port RTD node (Pt, Cu – 100 to +200C) | |
| TEMP-1122-E | 2-port RTD node (Pt: extended temp. range -20 to +540C) | |
| TEMP-1124-E | 4-port RTD node (Pt: extended temp. range – 20 to +540C) | |
| TEMP-1124-E | 4-port RTD node (Pt: cryogenic temp. range – 200 to 0C) |
SlideShare
Twitter
Facebook
YouTube
LinkedIn