The DeviceNet Scanner/Master – ModbusTCP Slave/Server Industrial Network Gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The DeviceNet Master interface can act both as a Master/Scanner and/or Adapter/Slave. The entire DeviceNet protocol is implemented into the module. The module manages control of up to 63 DeviceNet slaves. Full DeviceNet configuration can be defined and loaded into the Anybus-M module via the HMS configuration software NetTool-DN (included free of charge) or via Rockwell´s RSNetWorx.
The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
10/100 MBit twisted pair RJ45 connection
TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches
Modbus/TCP class 0, class 1 and partially class 2 slave functionality
1.4 Mbyte storage space on Flash disk
Support for AnyBus IPconfig utility for easy TCP/IP set up
SSI scripts used for easy display/control of process data on WEB-pages
Gateway diagnostics via WEB-pages
Complete DeviceNet 2.0 scanner implementation according to ODVA
DeviceNet Group 2 Client/Server / UCMM support
Manages up to 63 DeviceNet slaves
DeviceNet Configuration via AnyBus NetTool-DN or RSNetworx
DeviceNet Explicit peer to peer messaging, configuration consistency value. I/O Slave messaging: Bit strobe, Polling, Cyclic & Change of State (COS)
Support for Anybus OPC Server
2 Modbus-TCP ports simultaneously available through integrated switch
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 300 mA
I/O Input: Default 20 bytes, max 512 bytes
I/O Output: Default 20 bytes, max 512 bytes
Mech Rating: IP20/Nema1
Config Method: NetTool-DN or RS Networks.
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
DeviceNet baudrate: 125-500 kbit/s
DeviceNet MacID: 0-63
DeviceNet connector: 5-pole 5.08 mm Phoenix pluggable screw connector
Modbus-TCP connector: RJ45
Modbus-TCP address: Any valid IP-address
Modbus-TCP baudrate: 10/100 Mbit/s autodetect
Accessory order: 018021 (NetTool-DN configuration tool for DeviceNet)
Price Group: B
Order Code: AB7630