Interbus Slave Cu – Interbus Slave Cu Anybus X-gateway
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The gateway consists of two independent Interbus Interfaces, galvanically and logically isolated.
Each of the two Interbus 2Mbit/s interfaces are slave nodes that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called ?Process Data?, and one through a somewhat slower protocol called PCP, which is mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP.
Logically separated Interbus Interfaces
Individually isolated Bus In and Bus Out Interbus interfaces
Up to 10 words of Process data on Interbus
Interbus PCP v2.0 (0, 1, 2 or 4 words)
Name: Interbus Slave Cu – Interbus Slave Cu Anybus X-gateway
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 400 mA
Baud Rate: 500Kbit/s or 2Mbit/s
I/O Input: Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)
I/O Output: Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)
Mech Rating: IP20/Nema1
Power supply connector: 2-pole 5.08 mm Phoenix pluggable screw connector
Interbus connectors: D-sub 9-pin ? Bus In male, Bus Out female
Price Group: C
Order Code: AB7881