The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The LonWorks interface is a high performance interface to LonWorks networks. The interface supports LonMark objects handling. The required network variables on the LonWorks side can be configured and stored in FLASH. It is based on MIP that allows high throughput and a configurable set of up to 256 input and 256 output network variables. The interface can, via the “LWtool” PC-based configuration utility program, link, and convert data between the other network side and devices located on a LonWorks Network. The LonWorks side of the product can be configured for any type of network variable e.g. SNVTs or UNVTs.
The EtherCAT Slave Interface for the Anybus X-gateway implements CANopen over EtherCAT, and exchanges up to 512 bytes of data in each direction. The interface acts as a slave node, which means it can be accessed by an EtherCAT master, but it will not initiate communication by itself.
The module has two RJ45 connectors using 100 Mbit full duplex Ethernet. For configuration a XML-format device despription file is supplied by HMS.
Certification prepared for Lonmark application layer interoperability guidelines V3.2
LonWorks FT-X1 Transceiver
EtherCAT interface supports CANopen objects SDOs and PDOs
Up to 512 bytes of cyclic data in each direction (PDO)
Up to 512 bytes of acyclic data in each direction (SDO)
EtherCAT interface is DS301 v4.02 compliant
Includes special LW Config Software Tool for Network variable Setup
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 400 mA
I/O Input: Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
I/O Output: Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
Mech Rating: IP20/Nema1
Power supply connect: -pole 5.08 mm Phoenix pluggable screw connector
LonWorks baudrate: 78 kbit/s
LonWorks Connector: 5-pole 5.08 mm Phoenix pluggable screw connector
EtherCAT baudrate: 100 Mbit/s
EtherCAT connector: RJ45
EtherCAT config: Configured by EtherCAT Master via XML file (provided by HMS)
LonWorks Config: LW Tool ABX for LonWorks interface variable configuration (included).
Price Group: C
Order Code: AB7695