LonWorks – LonWorks Anybus X-gateway
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The gateway consists of two independent LonWorks intrefaces, logically and galvanically isolated from each other.
Each of the two LonWorks interfaces are high performance interfaces to LonWorks networks. The interfaces supports LonMark objects handling. The required network variables on the LonWorks side can be configured and stored in FLASH. It is based on MIP that allows high throughput and a configurable set of up to 256 input and 256 output network variables. The interface can, via the “LWtool” PC-based configuration utility program, link, and convert data between the other network side and devices located on a LonWorks Network. The LonWorks side of the product can be configured for any type of network variable e.g. SNVT’s or UNVT?s.
Logically separated LonWorks interfaces
Certification prepared for Lonmark application layer interoperability guidelines V3.2
LonWorks FT-X1 Transceiver
Includes special LW Config Software Tool for Network variable Setup
Name: LonWorks – LonWorks Anybus X-gateway
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 400 mA
Baud Rate: 78 kbit/s
I/O Input: Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
I/O Output: Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
Mech Rating: IP20/Nema1
Power supply connector: 2-pole 5.08 mm Phoenix pluggable screw connector
LonWorks Connectors: 5-pole 5.08 mm Phoenix pluggable screw connector
LonWorks Config: LW Tool ABX for LonWorks interface variable configuration (included).
Price Group: C
Order Code: AB7628