LonWorks to Modbus RTU Serial Gateway

£430.00

The Anybus Communicator LonWorks Gateway (ABC-LON-RTUslave) is a unique product that can bridge the communication gap with LonWorks networks and conventional Modbus RTU based systems & devices. The product can, via the PC-based configuration utility program ABC LWTool link data between devices located on a LonWorks Network and devices on a Modbus network. The LonWorks side of the product is fully compliant with the Lonworks network variables (SNVT’s) and can be set up to produce or consume almost any network variable. The Modbus side of the product supports the classic Modbus registers for Input and Output data.

SKU: AB7009

Product Description

The Anybus Communicator LonWorks Gateway (ABC-LON-RTUslave) is a unique product that can bridge the communication gap with LonWorks networks and conventional Modbus RTU based systems & devices. The product can, via the PC-based configuration utility program ABC LWTool link data between devices located on a LonWorks Network and devices on a Modbus network. The LonWorks side of the product is fully compliant with the Lonworks network variables (SNVT’s) and can be set up to produce or consume almost any network variable. The Modbus side of the product supports the classic Modbus registers for Input and Output data.

The Communicator Gateway supports RS232/422/485 on the serial side and Free Topology Network on the LonWorks side.

The Communicator is a SLAVE on the Modbus RTU side. This means that you connect this to a Modbus network which has a Master connected. The configuration of the module is simple and you can do it yourself with a configuration tool in Windows environment. 

The delivery comes complete with the configuration program ABC LWTool, a DSUB connector with screw terminals for the serial sub-network and a short Installation Leaflet for the electrical installation. 

 

 

Support for Modbus RTU Slave
Up to 256 input + 256 output LonWorks Network Variables / Modbus Word Registers
RS232/422/485 selection possible
CE, UL & cUL marked
Amount and type of network variables configurable, data linking between LonWorks variables (SNVT’s) and ModBus Registers
Support for self installation
FTT-10 Echelon Smart Transceiver for better immunity from magnetic and high-frequency common mode noise
DIN-rail mountable – PE via DIN-rail
Special LW Config Tool for Network Setup included

Size: 120 mm x 75 mm x 27 mm

Power Supply: 24 VDC

Temperature: 0-55°C

Baud Rate: 78 kbit/s (FT-X1 Free Topology)

Sub Baud Rate: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57,6 kbit/s

I/O Input: 256 Word Registers

I/O Output: 256 Word Registers

Mech Rating: IP20

Profile Support: LonMark objects and profiles are configurable

Config Method: ABC LWtool Modbus for Windows, included.

Appl Interface: RS232/422/485

LonWorks Tranceiver: FTT-10 Echelon Smart Tranceiver

Galvanic isolation: Standard for both bus side and serial side

Included accessories: LW Config Tool, DSUB with screw terminals for Sub-Network, Installation Leaflet.

Order Code: AB7009

 

Reviews

There are no reviews yet.

Be the first to review “LonWorks to Modbus RTU Serial Gateway”

Your email address will not be published. Required fields are marked *