ModbusTCP Slave/Server – J1939 Industrial Network Gateway
This ModbusTCP Slave/Server – J1939 Industrial Network Gateway provides connectivity between ModbusTCP (or EtherNet/IP) and a J1939 Heavy Duty vehicle (CAN) network. The X-gateway appears as a ModbusTCP slave/server allowing a ModbusTCP master/client to read or write data from the J1939 network.
HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the X-gateway ModbusTCP interface.
Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the X-gateway ModbusTCP interface. The configuration is downloaded from the PC to the X-gateway via an RS232 connection and is saved in FLASH memory.
* Electric Power Generation
* Oil & Gas
* Heavy Duty, Construction & Agricultural Vehicles
* Testing & Validation
* Any Diesel Engine based system supporting J1939
DIN-rail mountable – PE via DIN-rail
Wide power supply range (12-30 VDC)
Configuration via a Windows-based PC software tool (BWConfig)
Rugged IP20 aluminium enclosure
Supports FLASH field upgrades
UL and ATEX certification for Ex Hazardous Locations
Transmission and reception of all types of J1939 messages, including PDU1, PDU2, broadcast and destination specific.
J1939 Transport Protocol for transmission and reception of large messages (9 – 1785 bytes). Both connection based (RTS/CTS) and broadcast (BAM) are supported.
ModbusTCP 10/100 Mbit full duplex operation
Name : ModbusTCP Slave/Server – J1939 Industrial Network Gateway
Size: 126 mm x 110 mm x 42 mm
Power Supply: 12-30 VDC
Current Consump: Max 300 mA
Baud Rate: 10/100 Mbit autodetect on ModbusTCP
Mech Rating: IP20 / Nema 1
Profile Support: SAE J1939 (CAN)
Config Method: BW Config (free)
Appl Interface: CAN and Ethernet (twisted pair)
Ethernet connector: RJ45
Config connector: 9-pole DSUB
UL certification: E203225, Listed 67AM, UL-1604 Class 1, Div 2, GP A, B, C, D, Temp Code T4
ATEX certification: ATEX 135419, II 3 G, EEx nL IIC T4, DEMKO 03
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
CAN J1939 connector: 5-pole 5.08 mm Phoenix pluggable screw connector
Price Group: A
US orders: Contact HMS for US model numbers
Order Code: AB7665