Ethernet/IP Adapter/Slave - Profibus Slave Industrial Network Gateway

ModbusTCP Slave/Server – Profinet IO Device Industrial Network Gateway Anybus X-gateway

£430.00

The ModbusTCP Slave/Server – Profinet IO Device Industrial Network Gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

SKU: AB7650

Product Description

ModbusTCP Slave/Server – Profinet IO Device Industrial Network Gateway Anybus X-gateway

The ModbusTCP Slave/Server – Profinet IO Device Industrial Network Gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows. 

The gateway consists of two independent Ethernet interfaces, each with its own microporcessor system and TCP/IP stack.

The EtherNet interface consists of an embedded 2-port Modbus-TCP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The Modbus-TCP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch. 

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions. 

 

 

Support for AnyBus IPconfig utility for easy TCP/IP set up
SSI scripts used for easy display/control of process data on WEB-pages
Gateway diagnostics via WEB-pages
E-Mail Client, FTP & Telnet Server
Profinet IO and IT functions
Two independent 100 MBit twisted pair RJ45 connections
TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or ARP
2 x 1 Mbyte storage space on Flash disk
Support for Anybus OPC Server

Name : ModbusTCP Slave/Server – Profinet IO Device Industrial Network Gateway Anybus X-gateway

 Size: 114 mm x 44 mm x 127 mm

Power Supply: 24 VDC (±20%)

Temperature: -25-65°C°C

Current Consump: Max 400mA at 24VDC

I/O Input: Default 20 bytes, max 512 bytes

I/O Output: Default 20 bytes, max 512 bytes

Mech Rating: IP20/Nema1

Config Method: GSD file for Profinet

Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector

Ethernet baudrates: 10/100 Mbit/s autodetect

IP-addresses: Any valid IP-address

Ethernet connectors: RJ45

Profinet baudrate: 100Mbit/s

Price Group: A

Order Code: AB7650

Reviews

There are no reviews yet.

Be the first to review “ModbusTCP Slave/Server – Profinet IO Device Industrial Network Gateway Anybus X-gateway”

Your email address will not be published. Required fields are marked *