The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The gateway consists of two independent Ethernet interfaces, each with its own microporcessor system and TCP/IP stack.
The EtherNet interface consists of an embedded 2-port Modbus-TCP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The Modbus-TCP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions.
Support for AnyBus IPconfig utility for easy TCP/IP set up
SSI scripts used for easy display/control of process data on WEB-pages
Gateway diagnostics via WEB-pages
E-Mail Client, FTP & Telnet Server
Profinet IO and IT functions
Two independent 100 MBit twisted pair RJ45 connections
TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or ARP
2 x 1 Mbyte storage space on Flash disk
Support for Anybus OPC Server
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: Max 400mA at 24VDC
I/O Input: Default 20 bytes, max 512 bytes
I/O Output: Default 20 bytes, max 512 bytes
Mech Rating: IP20/Nema1
Config Method: GSD file for Profinet
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
Ethernet baudrates: 10/100 Mbit/s autodetect
IP-addresses: Any valid IP-address
Ethernet connectors: RJ45
Profinet baudrate: 100Mbit/s
Price Group: A
Order Code: AB7650