Profibus Master – EtherCAT Slave Industrial Network Gateway
The Profibus Master – EtherCAT Slave Industrial Network Gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Profibus-DP Master interface supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, a Windows based configuration software for Profibus from HMS (included free of charge).
The Anybus Profibus-DP Master interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.
The EtherCAT Slave Interface for the Anybus X-gateway implements CANopen over EtherCAT, and exchanges up to 512 bytes of data in each direction. The module has two RJ45 connectors using 100 Mbit full duplex Ethernet. For configuration a XML-format device despription file is supplied by HMS.
Profibus configuration: NetTool-PB for Windows
Complete Profibus DP Master according to IEC 61158
Up to 125 slaves can be connected
Profibus configuration through RS232 configuration port
Supports PA baud rate 45.45 kbit/s
Full EtherCAT slave
Supports SDOs and PDOs
100 Mbit full duplex Ethernet
Up to 512 bytes of cyclic data in each direction (PDO)
Up to 512 bytes of acyclic data in each direction (SDO)
Name: Profibus Master – EtherCAT Slave Industrial Network Gateway
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 400 mA at 24V
I/O Input: Default 20 bytes, max 512 bytes
I/O Output: Default 20 bytes, max 512 bytes
Mech Rating: IP20 /NEMA1
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate: 9600 bit/s – 12 Mbit/s
Profibus address: Node address 0-125
Profibus connector: D-sub 9-pin female
EtherCAT baudrate: 100 Mbit/s
EtherCAT connector: RJ45
EtherCAT config: Configured by EtherCAT Master via XML file (provided by HMS)
Price Group: B
Accessory order code: 018330 (NetTool-PB configuration tool for Profibus)
Order Code: AB7696