Profibus Master – Ethernet/IP Adapter/Slave Industrial Network Gateway

£602.00

The Anybus Profibus Master – Ethernet/IP Adapter/Slave industrial network gateway copies I/O-data in both directions enabling data exchange between two networks

SKU: AB7800 Category:

Product Description

The Profibus Master – Ethernet/IP Adapter/Slave industrial network gateway
copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The Anybus-M Profibus-DP interface  industrial network gateway
supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, the windows based configuration software for Profibus from HMS (included free of charge).
The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.

The EtherNet interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.

Profibus configuration: NetTool-PB for Windows
Built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor
Up to 125 slaves can be connected
Profibus configuration through RS232 configuration port
10/100 Mbit/s twisted pair RJ45 connection
TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches
Ethernet/IP level 2 I/O Server CIP (ControlNet & DeviceNet)
1.4 Mbyte storage space on Flash disk
Support for AnyBus IPconfig utility for easy TCP/IP set up
SSI scripts used for easy display/control of process data on webpages
Gateway diagnostics via WEB-pages
Configured by EtherNet/IP Scanner via EDS file (provided by HMS)
Complete Profibus DP Master according to IEC 61158
Support for Anybus OPC Server

Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Temperature: -25-65°C
Current Consump: Max 400mA at 24VDC
I/O Input: Max 512 bytes
I/O Output: Max 512 bytes
Mech Rating: IP20/Nema1
Config Method: NetTool-PB, Anybus IPconfig
Power supply connector: 2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate: 9600 bit/s – 12 Mbit/s
Profibus address ran: Node address 0-125
Profibus connector: D-sub 9-pin female
Ethernet/IP baudrate: 10/100 Mbit/s autodetect
Ethernet/IP connecto: RJ45
Ethernet/IP address: Any valid IP-address
Accessory order code: 018330 (NetTool-PB configuration tool for Profibus)
Price Group: B
Order Code: AB7800

 

Reviews

There are no reviews yet.

Be the first to review “Profibus Master – Ethernet/IP Adapter/Slave Industrial Network Gateway”

Your email address will not be published. Required fields are marked *