Profinet IO Device – CANopen Slave Anybus X-gateway
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The CANopen interface is an adapter class product allowing fast data exchange. The CANopen slave?s data map consists of Process Data Objects (fast data) and Service Data Objects (slow data). The data on the CANopen bus is updated when a change is made or on request from another node. The CANopen interface module is certified by the Can In Automation organisation and has proven conformance and interoperability with leading PLC´s, SoftPLC´s, HMI´s etc
The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions.
SSI scripts used for easy display/control of process data on webpages
Gateway diagnostics via WEB-pages
CANopen PDO and SDO data objects supported
CANopen Unscheduled data exchange support
E-Mail Client, FTP & Telnet Server
Profinet 100 Mbit/s twisted pair RJ45 connection
Profinet IO and IT functions
1 Mbyte storage space on Flash disk
TCP/IP settings configurable with Profinet config tool, Anybus IPconfig, DHCP or the Profinet configuration tool.
CANopen profile DS-301 v.4.02
Heatbeat and node guarding support
Network Stor/Restore functionality
Support for Anybus OPC Server
Name: Profinet IO Device – CANopen Slave Anybus X-gateway
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: Max 400mA at 24VDC
I/O Input: Default 20 bytes, max 512 bytes
I/O Output: Default 20 bytes, max 512 bytes
Mech Rating: IP20/Nema1
Config Method: GSD-file for Profinet, EDS-file for CANopen
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
Profinet connector: RJ45
Profinet IP-address: Any valid IP-address
CANopen baudrate: 10 kbit/s to 1 Mbit/s
CANopen connector: D-sub 9-pin male
CANopen address: Node address 1-99
Profinet baudrate: 100 Mbit/s
Price Group: A
Order Code: AB7658