Profinet IO Device – FIP Slave Anybus X-gateway
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The FIPIO interface is based an embedded Anybus-S module providing industrial performance and quality. FIPIO station address can be selected via switches on the end side of the module. A transformer connection on the module provides a isolated fieldbus interface.
The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions.
SSI scripts used for easy display/control of process data on webpages
Gateway diagnostics via WEB-pages
Supports both FIP and WorldFIP standards
FIPIO profile FEDP (Extended Device Profile), class 0
Transformer isolated FIP interface
E-Mail Client, FTP & Telnet Server
Profinet IO and IT functions
Profinet 100 Mbit/s twisted pair RJ45 connection
1 Mbyte storage space on Flash disk
TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or the Profinet configuration tool.
Support for Anybus OPC Server
Name: Profinet IO Device – FIP Slave Anybus X-gateway
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 400 mA
Baud Rate: Default 20 bytes, max 64 bytes
Sub Baud Rate: Default 20 bytes, max 64 bytes
Mech Rating: IP20/Nema1
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
Profinet connector: RJ45
Profinet address: Any valid IP-address
FIPIO baudrate: 1 Mbit/s
FIPIO address: Node address 0-99
FIPIO connector: D-sub 9-pin male
Profinet baudrate: 100Mbit/s
Price Group: C
Order Code: AB7655