Ethernet/IP Scanner/Master - Modbus Plus Slave Industrial Network Gateway

Profinet IO Device – LonWorks

£860.00

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

SKU: AB7662

Product Description

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions.

The LonWorks interface is a high performance interface to LonWorks networks. The interface supports LonMark objects handling. The required network variables on the LonWorks side can be configured and stored in FLASH. It is based on MIP that allows high throughput and a configurable set of up to 256 input and 256 output network variables. The interface can, via the “LWtool” PC-based configuration utility program, link, and convert data between the other network side and devices located on a LonWorks Network. The LonWorks side of the product can be configured for any type of network variable e.g. SNVT’s or UNVT?s.

 

 

Certification prepared for Lonmark application layer interoperability guidelines V3.2
SSI scripts used for easy display/control of process data on webpages
Gateway diagnostics via WEB-pages
Profinet Real-time and IT functions
E-Mail Client, FTP & Telnet Server
LonWorks FT-X1 Transceiver
Profinet 100 Mbit/s twisted pair RJ45 connection
1 Mbyte storage space on Flash disk
TCP/IP settings configurable with Profinet config tool, Anybus IPconfig or DHCP
Support for Anybus OPC Server
Includes special LW Config Software Tool for Network variable Setup

Size: 114 mm x 44 mm x 127 mm

Power Supply: 24 VDC (±20%)

Temperature: -25-65°C

Current Consump: max 400 mA at 24V

I/O Input: Default 20 bytes, max 512 bytes

I/O Output: Default 20 bytes, max 512 bytes

Mech Rating: IP20/Nema1

Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector

Profinet connector: RJ45

Profinet IP-address: Any valid IP-address

LonWorks baudrate: 78 kbit/s

LonWorks Connector: 5-pole 5.08 mm Phoenix pluggable screw connector

Profinet baudrate: 100Mbit/s

LonWorks Config: LW Tool ABX for LonWorks interface variable configuration (included).

Price Group: C

Order Code: AB7662

 

Reviews

There are no reviews yet.

Be the first to review “Profinet IO Device – LonWorks”

Your email address will not be published. Required fields are marked *