Ethernet/IP Scanner/Master - Modbus Plus Slave Industrial Network Gateway

Profinet IO Device – Modbus RTU Slave

£430.00

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

SKU: AB7659

Product Description

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions. 

The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. 

 

 

Modbus RTU transmission media RS485
Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23
Gateway diagnostics via WEB-pages
Profinet 100 Mbit/s twisted pair RJ45 conn…
Profinet IO and IT functions
Profinet 100 Mbit/s twisted pair RJ45 connection
1 Mbyte storage space on Flash disc
TCP/IP settings configurable with Profinet config tool, Anybus IPconfig or DHCP
Support for Anybus OPC Server

 Size: 114 mm x 44 mm x 127 mm

Power Supply: 24 VDC (±20%)

Temperature: -25-65°C°C°C

Current Consump: max 400 mA at 24V

I/O Input: Default 20 bytes, max 512 bytes

I/O Output: Default 20 bytes, max 512 bytes

Mech Rating: IP20

Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector

Profinet connector: RJ45

Profinet address: Any valid IP-address

Modbus RTU baudrate: 1200 Bit/s to 57 600 Bit/s

Modbus RTU address: Node address 1-247

Modbus RTU connector: D-sub 9-pin female

Profinet baudrate: 100Mbit/s

Price Group: A

Order Code: AB7659

Reviews

There are no reviews yet.

Be the first to review “Profinet IO Device – Modbus RTU Slave”

Your email address will not be published. Required fields are marked *