AS-Interface Master - Profinet IO Device Industrial Network Gateway

Profinet IO Device – Profibus Slave

£430.00

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

SKU: AB7652

Product Description

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Profibus address is set via rotary switches 0-99.

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with “Read Data” functions.

 

 

SSI scripts used for easy display/control of process data on webpages
Gateway diagnostics via WEB-pages
Watchdog support
Sync and Freeze
Supports PA baud rate 45.45 kbit/s
Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158
Profinet IO and IT functions
Profinet 100 Mbit/s twisted pair RJ45 connection
1 Mbyte storage space on Flash disk
TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or Profinet Configuration tool
Support for Anybus OPC Server

Size: 114 mm x 44 mm x 127 mm

Power Supply: 24 VDC (±20%)

Temperature: -25-65°C

Current Consump: Max 400mA at 24VDC

I/O Input: Max 244 bytes using DP / 512 bytes using DPV1 (max 328 bytes in+out)

I/O Output: Max 244 bytes using DP / 512 bytes using DPV1 (max 328 bytes in+out)

Mech Rating: IP20/Nema1

Config Method: GSD files for Profibus and Profinet

Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector

Profinet connector: RJ45

Profinet address: Any valid IP-address

Profibus baudrate: 9600 bit/s – 12 Mbit/s autodetect

Profibus address: Node address 0-99

Profibus connector: D-sub 9-pin female

Profinet baudrate: 100Mbit/s

Price Group: A

Order Code: AB7652

Reviews

There are no reviews yet.

Be the first to review “Profinet IO Device – Profibus Slave”

Your email address will not be published. Required fields are marked *