The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The PROFINET interface works as a I/O-Device on the PROFINET IO or IRT network. The interface support up to 220 bytes of IO for both Input and Output data. The module baud rate is 100Mbit/s (full duplex). Four LEDs will continuously indicate the actual PROFINET status and eventually error messages. The module also supports the normal PROFINET Alarm functionality. The interface uses 2 normal RJ45 connectors for the PROFINET connection.
The PROFINET IO/IRT module also support functions like Webserver and FTP functions. The IT functions can be used simultaneously with the PROFINET communication.
The PROFIBUS DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The PROFIBUS interface module is certified by the PROFIBUS user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. PROFIBUS address is set via rotary switches 0-99.
Size: 114 mm x 44 mm x 127 mm
Power Supply: 24 VDC (±20%)
Current Consump: max 400 mA at 24V
I/O Input: 220 bytes
I/O Output: 220 bytes
Mech Rating: IP20/Nema1
Power supply connect: 2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate: 9600 bit/s – 12 Mbit/s autodetect
Profibus address: Node address 0-99
Profibus connector: D-sub 9-pin female
Profibus config: Configured by Profibus Master via GSD file (provided by HMS)
Price Group: C
Order Code: AB7913